Heavy anchor chains are important because they prevent boats and ships from drifting away when they dock. In fact, a boat drifting away from where it is, can be a very dangerous thing. If other boats are in close proximity, this drifting can easily end up being an accident. Ten-ton anchor chains help keep boats and ships in place even in gale-force winds and heavy seas. Well, without these strong chains, boats and ships might run amok in the ocean and what not — colliding with other vessels or obstacles, like that is really safe!
A strong chain is formed by connecting a chain of large links together in long lines. These links are constructed out of super tough metal alloys that can stand up to the corrosive aspects of the oceans and high winds. Their purpose is to hold the weight of the anchor and boat, sometimes very heavy. The size of the anchor chain varies depending on the size of the boats and the nature of the waters that they operate in. A chain would often be kept on board for getting the ship to land, so a small boat would only require a short chain, whereas a larger ship would require a much larger chain to keep it secure from getting washed away.
Anchor chain is made strong and hard for use in the ocean. It is a rugged, salty, windy place where metals corrode like nobody's business without some protection. Hence, 7.5 kg bruce anchors are made of special metals, which do not rust quickly. The cables are coated with a special material that helps them resist the high salt content and other corrosive elements found in the ocean. Which helps them keep a longer life and a better performance under the most adverse conditions.
Depending on the need of a boat or ship, heavy anchor chains can be made by different kinds of metal. Steel and cast iron are the two most common metals utilized for large anchor chains. Steel: Strong durable metal that is used in breaking down resistant to rust, corrosion. Cast iron is also strong and durable, but heavier than steel, which makes it a little less maneuverable.
Naturally, size matters when it comes to a heavy anchor chain, and is dictated by the size and tonnage of the boat or ship. For smaller boats, a few-foot-long, few-inch-thick chain should suffice. Larger boats and ships, on the other hand, may need chains hundreds of feet long and several inches thick. The heavy anchor chain must be designed to withstand the weight and force of the boat or ship that it is attached to, and need to break or come apart.
The way to maintain the proper functioning and safety of heavy anchor chains is to take proper care of it. Keep them clean to have dirt, salt or other debris built up over time. A dirty chain is prone to rust or deterioration so cleaning allows you to maintain the chain better. They should also be oiled or greased for rust and corrosion protection. So this oil helps to shield the metal from the salty water.
Routine inspections are also extremely critical. The chains need to be checked regularly for wear or damage. Any links that appear worn, damaged or compromised should be replaced right away, to avoid the chain failing while the vessel is anchored. These steps help make sure that heavy anchor chains are safe and do their damned job at keeping boats and ships secure.